This Is The Myths And Facts Behind Saab 9-3 Key Replacement
How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners have to follow a series of unique steps to add a second ignition key. This requires the use of a handheld computer called Tech-2 which is used by the dealer. Then a new key as well as transponder need to be bought and then programmed into the car.
It is an excellent idea to rotate your keys in order that one does not wear out faster than the other. This will help to keep your keys in perfect condition.
Replacement Case
The new key fobs for keys are not like the older Saab keys. They have electronics that make them difficult to duplicate. This has made car theft significantly more difficult than it was just a few years ago. It has also made it more costly to replace keys that were lost.
Every owner of a Saab 9-3 needs to have at least two working keys. If one gets lost, it costs a fortune to add another to the vehicle because it requires replacing the CIM module, and then reprogramming the locking cylinders. Dealers typically charge between $100 and $200 for this.
There are some ways around these costly. Some parts providers will use the code of an old key to cut a brand new metal blade at a fraction the cost of the dealer. The key must be exactly the same as the original to allow it to work in your vehicle.
Follow these steps to replace the case. You'll require a flathead and a lot of patience. With the screwdriver, slowly break the plastic and separate the emergency keys from the case. Once you have the case opened, take out the electronics and put them in the new case. Make sure you put the correct badge and key back into the case as well.
Replacement Battery
The Saab 9-3 replacement battery is an inexpensive part that can be quickly and easily replaced. This video tutorial on DIY from YouTube Cyclone Cyd shows how to replace the battery for the remote key fob in just four steps. This tutorial is compatible with any modern Saab key fob. However, the process might differ slightly.
This button is usually located close to the Saab logo on the back of the fob. This button is usually located on the back of your fob, just below the Saab Logo. Use a flathead to insert the screwdriver through the small hole on this button. This should be enough to open the fob's case to allow you to replace the battery.
Once you have installed the new batteries CR1632, it is possible to reassemble the remote key fob. Then, you can program it into your car. The whole process should take more than an hour, if not less. This is a straightforward procedure that doesn't require special tools.
If you lose your key, the procedure will be slightly more complicated however it can be done. The dealer must first read the VIN of the vehicle and order a replacement TWICE module and key blade with the proper unique code. After that, they'll need to cut the replacement key and then program it with the latest software tool known as MDI.
Key Replacement Fob
The key fob is the device that locks and unlocks your car, it has batteries inside. Batteries have a limited lifespan and will eventually fail. saab key programming is a common problem that happens with all cars and the good news is that you can change the batteries in a majority of key fobs without having to replace the entire case. Amazon sells replacement fobs with all the electronic components installed. It is easy to open the case and replace the batteries. You'll need to remove the emergency key before you replace the batteries. To accomplish this, simply insert a small screwdriver that is flat into the slot that is in the middle of the. The case will split once you rotate the screwdriver around it.
If you are about to replace the keys, ensure that you have a spare as this can reduce your total cost by a substantial amount. If you have an extra key, you can request the dealer to cut it and program it for your vehicle. This is less expensive than purchasing a brand new key fob.
It is possible to add another key to your car even if you don't have one, but it will require a great deal of research and work. It will cost you a few hundred dollars to add a second car key. The computer of the car also needs to be programmed. This can be done by a professional, but it's a costly option for most owners.
Replacement Ignition
The latest SAAB 9-3 uses an alarm system that is more sophisticated that is based on a key code. If you lose your only key, it could be costly to purchase a new one since the car needs to have a special computer added and also be programmed to accept a new key. Dealers can even charge hundreds of dollars to program an additional key if they are unable to do it.
If you've lost your only working key, a dealer will repair your car's computer (known as the CIM or SAAB TWICE) to make the replacement, and will charge you the highest price for it. We can reprogramme the existing EEPROM inside your car's computer to make it ready to accept an additional key. This will save you more than 50% of the cost you would spend at a dealer.
If you've been a long-time owner of a 03-11 SAAB 9-3, then you likely realize that the ignition key isn't all that robust. If the ignition key you have isn't working properly, you should look into replacing it. They can become sticky and the buttons have been known to fall off. Luckily, replacing the ignition key isn't as complicated as it seems, and it is fairly easy to do with the proper tools.